KNX is a uniform, manufacturer-independent communication protocol for intelligently networking state-of-the-art home and building system technologies.
The KNX TP1 Module provides two separate functions, which set themselves up automatically depending on the application. Some features of the site may not work correctly. WAGO's Touch Panels (HMI panels) not only improve the operability of machines and systems, but also offer an outstanding design and advanced technology. WAGO's Touch Panels (HMI panels) not only improve the operability of machines and systems, but also offer an outstanding design and advanced technology.
An ETS plug-in is required so that data from the application program can be allocated to group addresses.Advantages: Controller and Module: RouterTogether, the KNX IP Controller and the KNX/TP1 Module make up the KNXnet IP Router, which connects traditional TP1 networks to ETHERNET. Limiting telegram rates and an optimized boot sequence improve network traffic for faster startup. This volume describes the KNX application models grouped per Application Domain: lighting, shutters and blinds, HVAC, access control. The “Standard Motor Interface” (SMI) is the standardized electrical interface for roller shutter and sunblind drives. For convenient use, they are designed so that you can apply already known and proven methods and procedures of the ETS. ), High speed, fast response times and larger amounts of data on devices directly connected to the ETHERNET, Complete integration of twisted-pair devices, KNX IP Controller can be combined with the KNX TP1 Module for versatile applications, Combinable with all 750 Series I/O Modules, Integration of KNX TP1 networks into the WAGO-I/O-SYSTEM, Combinable with all building-related WAGO controllers (e.g., BACnet), KNX IP Router by combining the KNX IP Controller and KNX TP1 Module, ETHERNET access to TP1 network for ETS or visualization. Products for Building Automation and Installation. Thanks to a broad range of applications, numerous devices and systems can be linked together with KNX. The large memory provides reserves for complex controller tasks. The respective product databases/plug-ins for the KNX IP Controller, KNX TP1 Module and KNX IP Router do more than support device-specific configuration.
KNX is used to plan and control energy-efficient solutions for more functionality and convenience while simultaneously reducing energy costs. Connectivity to conventional sensors and actuators, as well as complex connections to DALI, EnOcean and others, are cost-effectively unified on the WAGO KNX IP Controller. For convenient use, they are designed so that you can apply already known and proven methods and procedures of the ETS. In this case, it constitutes a standard KNX bus node on the KNX side, which is incorporated into a KNX network by means of the ETS. There are two programming buttons on the controller for startup.Advantages: The respective plug-ins for the KNX IP Controller, KNX TP1 Module and KNX IP Router do more than support device-specific configuration. With KNX, devices from different manufacturers are compatible and can be flexibly combined in one comprehensive solution.