Why is the power light on my monitor not coming on? Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device drivers on my computer". This indicates an internal failure inside the monitor. - If the 'Properties' button is active. Under Power Schemes drop-down menu, select - ALWAYS ON. Make sure that none of the pins on the signal cable are bent or broken. С момента основания AOC полвека тому назад, мы специализируемся в технологиях обработки изображений. Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button. Do not use any paper products to clean the screen. Check the pin connector of your monitor video cable, verify that there are no damaged or bent pins, if everything looks fine; then this would indicate a failure inside the monitor. Abra la ventana “Actualizar software de controlador-Monitor PnP genérico” haciendo clic en “Actualizar controlador…” y, a continuación, haga clic en el botón “Buscar software de controlador en el equipo”. Select the 'Settings' tab then click on 'Advanced...'. Select your monitor model and click on the 'Next' button. Verify that the video card and monitor driver are properly installed. Haga clic en el botón “Cambiar la configuración de pantalla”. You can find this on a small white sticker label on the back of the monitor. In order for the Plug & Play feature of the monitor to work, you need a Plug & Play compatible computer & video card. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles. Click on the 'Finish' button then the 'Close' button. Move the mouse or press a key to de-activate the screen saver or power saving mode. Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button. Click on the 'Start' button and then click on 'Control Panel'. You will have to contact the manufacturer of the adapter for the correct settings to use with your monitor. Also make sure that all the pins of the monitor's video cable are in good condition. Monitor displays an “Out of Range” message. For the monitor driver, please visit our website driver page. Select 'Display a list of the known drivers for this device so that I can choose a specific driver', then click on 'Next' and then click on 'Have disk...'. Make sure that the signal cable is properly connected to the monitor and is securely inserted into the video card in the back of the computer. Click on the 'Driver' tab and then click on 'Update Driver...' button. Please check the user’s manual for supported display mode or input and configure your computer to those settings. Click on 'Finish' button then the 'Close' button.
Haga clic en el botón “Aceptar”. Select 'Display a list of the known drivers for this device so that I can choose a specific driver', then click on 'Next' and then click on 'Have disk...'.
For all Windows Operating systems: Go to START button, click on SETTINGS, click on Control Panel. These problems are caused by using an extension video cable or switch box.
Under Power Schemes drop-down menu, select - ALWAYS ON. Contact your computer manufacturer for help. Select the "xxx.inf" file and click the “Open” button. Why do I see horizontal & vertical disturbances or waving on the screen? Click the “Have Disk” button. If you are unable to resolve a problem with your monitor on your own, please call your local AOC Customer Service Hotline.
Click "Properties" in the "Monitor" tab. What is the reason of this? Right click and click All apps at the bottom-right of the screen. Check with your computer manufacturer.
Why does the display on my monitor appear to flicker, bounce or wave? - If the 'Properties' button is inactive, it means your monitor is properly configured. This means the monitor is receiving either very high or low signals from the video card of the computer, you can bypass your computer settings by going to Safe Mode. For more information, please refer to the User Manual under the 'Pixel Policy' section. Within the warranty period, any AOC displays with manufacturing defects or faulty components will be repaired or replaced at no additional charge. This means the monitor is receiving either very high or low signals from the video card of the computer, you can bypass your computer settings by going to Safe Mode.
Please visit www.aoc-europe.com and refer to our support page for more information how to contact our technical support. (LCD monitor only). Lige siden AOC blev grundlagt for et halvt århundrede siden, har vi specialiseret os i skærmteknologi.
No. Windows NT doesn’t require a monitor driver. Close all open windows and remove the CD. Select the Power Management icon. Select the 'Don't Search.